Hunter sprinkler head adjustment tool

How to adjust hunter sprinkler heads without tool. Insert the steel hex end of the hunter wrench into the radius adjustment screw. There are two adjustments that can be made on rotors, arc and radius. Using the palm of your hand, rotate the turret counterclockwise to. Adjusting the arc and radius of a rotor is an easy task. It is recommended that initial adjustments be made before installation. Adjustable heads are preset to approximately degrees. Turn the head clockwise to. In other words, how far to the left and to the right the sprinkler will be adjusted to rotate.

Rotate the arc to adjust water supply;. The degrees of coverage of a sprinkler from one side of pattern to the other. Most residential rotors are adjusted the same way. If you want to increase the arc, turn the key to the left. Sprinklers may be adjusted with water on or off.

To increase your sprinkler coverage, put the allen wrench inside the hole by the raised arrow and twist it to the left to get a longer spray. Install a wrench for adjusting the spray. Fortunately, most types of sprinklers can be easily adjusted without the need for specialist tools or professional experience. Use the mp rotator adjustment tool for faster, easier adjustments. The wrench will stop turning when adjusted to the maximum arc degrees , do not go past this stop.

The degrees of coverage of a sprinkler from one side of. In other words, the arc is how far to the left and to the right the sprinkler will be adjusted to rotate. The angle that is formed by your sprinkler is called the arc. Move the sprinkler head by hand to modify the watering direction. Then turn the water on. You should position the angles of your sprinkler heads, so there are no gaps in the coverage. Rotating sprinkler heads are adjustable that allows you to adapt this effortlessly.

Here you will need a pair of pliers to pop up the arc on the sprinkler heads. There are different colored heads which indicate reach, and how narrow or wide of an area the sprinkler can cover. How do you adjust a hunter pro spray sprinkler head? Each full turn of the wrench will increase the arc Rotate the arc to adjust water supply;. Adjust the radius and arc of your hunter pgj spinklers for full coverage. If you want to increase the arc of your hunter rotor head, look for the adjustment socket at the top of each sprinkler head and insert the plastic key.

To increase the arc of your hunter rotor head, you'll want to insert the plastic key into the adjustment socket, which can be found on the top of each sprinkler head.

You need to set the fixed left edge on the sprinkler head. Then tighten the nozzle range screw. Image courtesy of hunter industries.

Turn the small center screw with a small flat screwdriver. With the mp rotator tool mptool or a small flat bladed screwdriver, rotate the radius adjustment screw: To increase your sprinkler coverage, put the allen wrench inside the hole by the raised arrow and twist it to the left to get a longer spray.

A guide for adjusting sprinklers note:. You may adjust a hunter rotor head with water on or off. It is recommended that initial adjustments be made before installation.

The process is similar for the i series mo. There are two adjustments that can be made on rotors, arc and radius.

Adjustable heads are preset to approximately degrees. Holding the nozzle turret at its right stop turn the wrench clockwise. Sprinklers may be adjusted with water on or off.

Insert the plastic key end of the hunter wrench into the adjustment socket on top of the sprinkler. Use the mp rotator adjustment tool for faster, easier adjustments. Do not go past this stop. Adjusting the arc and radius of a rotor is an easy task. To adjust the arc, follow these steps: Fortunately, most types of sprinklers can be easily adjusted without the need for specialist tools or professional experience.

Adjust the radius and arc of your hunter pgj spinklers for full coverage.